Tascam DR-22WL

The DR-22WL is a streamlined model that has been designed to provide an easy-to-use interface so that anyone will be able to enjoy high-quality linear PCM recording without difficulty. For recording music played primarily on acoustic instruments, including acoustic guitars and wind and string instruments, this model is ideal. With its easy operation and high quality recording, this recorder can also be used for applications other than music, including for recording audio when capturing video with a digital SLR camera and for interviews.

Not only does this handheld recorder meet the demand for recording high-quality audio with ease, it also has advanced Wi-Fi functions for full remote control, streaming playback and file transfer.

New functions with firmware version 1.20

Recording settings and GPS information can be saved with BWF files

A major improvement in version 1.2 is the XRI (eXtended Recording Information) feature that can be used with BWF format recordings. It stores the recording settings after each recording and allows the user to identify the recorder as well as the settings used for a certain recording. In addition, a smartphone’s GPS information can be embedded while connected to the recorder via Wi-Fi and using the TASCAM DR CONTROL app. Storing GPS data is useful when working in multiple locations, e.g. when making outdoor sound-gathering recordings. XRI information can be displayed on the main unit, on the DR CONTROL app or on other XRI-compatible models and applications.

Tascam DR-44WL

Over-level peaks can be marked automatically

The new Peak Mark function automatically places a mark two seconds before a detected peak (PEAK LED) during recording, which is useful for post-recording confirmation. When there are no problems found after confirmation, the mark can be deleted. In the BWF format (in the same way as with other types of marks) the peak mark can be utilized in corresponding DAWs. To avoid multiple marks for the same overload event, new marks are only set 10 seconds after the previous peak mark.

Tascam DR-44WL

Protection for important files

The new Protect function prevents important recorded files from being mistakenly deleted by operating the main unit. Protection can be switched on or off for each recording file individually.

Other improved features

The following functions have been improved or added based on customer feedback:

  • Marks can be added during playback
  • New Mark Skip Mode allows to set what type of mark to use when moving between them
    (ALL/MANUAL/LEVEL/TIME/PEAK/OFF)
  • Marks can be removed all at once
  • Empty folders can be deleted

Built-in X-Y cardioid stereo mics enable high-quality audio recording

Tascam DR-22WLTwo unidirectional mic units are utilized together for stereo recording in an X-Y format. They are arranged so that their diaphragms overlap in the same axis. X-Y format recording can capture sound with a good stereo image and no sense of emptiness at the center. Since the mic units will not distort even at high volumes, recording with a great sense of nearness is possible even in high-volume situations.

In addition, a shock mount structure is used to hold the mic capsules. This absorbs vibrations effectively even when mounted on a digital SLR camera.

  • Cardioid condenser mics in an X-Y configuration for impeccable stereo recordings
  • Designed to handle high sound pressures of up to 120 dB
  • Low noise realized through the use of high-performance audio codec

Large LCD and scene dial make the interface simple and easy to understand

Tascam DR-22WLThe scene dial has eight preset scenes with different settings. This function automatically makes adjustments according to the situation so all the user needs to do for optimal recording is press the record button. Of course, when "M" (manual) is selected, settings can be adjusted manually. When set to ">", the user can use the play function to adjust the speed of playback, change the pitch and use other features that are perfect for practice.

The bottom of the large 128×128 LCD shows the next operations that are necessary according to the current conditions. The 4 function keys can be used to make selections for easy operation. This is a handheld recorder that can be easily mastered.

  • Scene dial allows instant recall of settings suitable for different scenes
  • Large 128×128 LCD and 4 function keys enable simple operation
  • Input level adjustment dial designed for usability

Remote Wi-Fi operation eliminates handling noise

Tascam DR-22WLTASCAM has once again revolutionized handheld recording! The DR-22WL creates its own Wi-Fi network, and a free dedicated app can be used for remote operation without touching the unit. Not only does the app allow recording to be started and stopped, it can also be used to check and adjust input levels from an iOS or Android device. Everything related to recording can be done by Wi-Fi.

Since the Wi-Fi transmission range is about 20m/65 feet, this feature can be used with the recorder in places that are normally out of reach. In addition, audio can be checked by Wi-Fi after recording. The audio quality can be checked through headphones connected to a smartphone. With operation capabilities and flexibility that exceeds infrared remotes - and reliability that approaches that of wired remotes - this handheld recorder allows freedom of placement that far surpasses that of previous models.

Note: Checking audio via Wi-Fi is intended for use after recording.

  • Simple Wi-Fi connections without a router
  • Remote control using the free DR CONTROL app (iOS/Android)
  • Check recorded audio using wireless playback

Smartphone can be used with unit to send recorded files

Tascam DR-22WLThe benefits of Wi-Fi are not limited to recording. Audio files can be transmitted via Wi-Fi to smartphones and computers. They can also be uploaded to SoundCloud using a dedicated application. SoundCloud is tightly linked with other social networking services. For example, if a recording is shared to Facebook, it will appear on the user's timeline. By uploading a live recording immediately after performance, audience members could listen to the concert again on their way home.

Note: An Internet connection is necessary to upload files to the Internet from a smartphone.

  • Dual-format recording function allows simultaneous recording of both WAV and MP3 files
  • Share audio files from SoundCloud to other social networking services
  • Transfer files to computers wirelessly

Multiple automatic features allow simplified operation

Even though the DR-22WL is a professional recording device, it also has numerous automatic functions that make capturing high-quality recordings easy for anyone. In addition to automatic recording functions, the unit also has functions that simplify file management. Users can create high-quality recordings without complicated operations.

  • Automatic level optimization functions (peak reduction and limiter)
  • Automatic track incrementation functions (new file creation) can be set according to the application
  • Automatic recording function that starts recording when a preset audio input level is detected
  • Automatic mark function that adds marks according to set conditions
  • Automatic division function that divides files at pre set marks (V1.10)

Overdubbing and reverb can be used

Tascam DR-22WLIn addition to recording, this unit also has functions that can be used for music creation. The overdubbing function allows new sounds to be layered over existing recordings. This can be used to add solo parts to karaoke and to create harmonies by recording the same instrument multiple times.

By using the reverb effect, users can create sounds that are even more appealing using just the DR-22WL.

Main Features

  • Recording at up to 96 kHz/24-bit (WAV/BWF format)
  • MP3 recording
  • Micro SD/SDHC/SDXC media supported (4 GB microSD card included)
  • Improved internal clock – ideal for filmmaking
  • Unidirectional condenser microphones in X-Y configuration
  • Accepts up to 120 dB SPL
  • Cirrus Logic AD/DA codec with improved audio performance and low power consumption
  • 128x128 graphic LCD with backlight
  • Built-in monaural loudspeaker (300 mW)
  • Extended operation time
  • Wi-Fi connection supports monitoring, transport control, level control, file transfer and more
  • Easy Wi-Fi connection with Android
  • Dedicated wi-fi file transfer application for Windows/Mac available
  • Scene Dial and re-designed user interfaces for ease of operation
  • Dual format recording function (WAV and MP3)
  • Overdub function
  • ERI (Extended Recording Information) function for notes on recording settings
  • Reverb effect for acoustic instruments and vocals
  • Four-position low-cut filter (40/80/120/220 Hz)
  • Peak-reduction function automatically sets the optimal level when peaks are detected in music recordings
  • Limiter for overload protection
  • Auto-recording function to automatically start recording based on input level
  • Pre-recording function that can record up to 2 seconds prior to actual record start
  • Self-timer recording function
  • Mark function (manual or automatic by peak or by time (with firmware version 1.20))
  • Variable Speed Audition (VSA) is ideal for practice and arrangement (50–150% change of speed)
  • Key changing function with fine-tuning (±6 halftones)
  • Divide function (manual or automatic by markers)
  • File delete function
  • I-O loop playback function – ideal for rehearsal
  • Resume function retains the last stop position when power is turned back on
  • Audio files created on computer are playable (only in formats compatible with this product)
  • Track division function creates new files during recording (manual or automatic by time or level)
  • File name format can be set to use a user-defined word or date
  • Metronome for rehearsal
  • Stereo-mini headphones/line output with 20 mW output power per channel
  • USB 2.0 high-speed file transfer to/from your computer
  • Powered by two AA batteries, AC adapter (available as option) or USB bus-power
  • Tripod screw socket

Specifications

General
Recording media microSD card (64 MB − 2 GB)
microSDHC card (4−32 GB)
microSDXC card (64−128 GB)
Recording/playback formats BWF: 44.1k/48k/96kHz, 16/24 bit
WAV: 44.1k/48k/96kHz, 16/24 bit
MP3: 44.1k/48 kHz, 32/64/96/128/192/256/320 Kbit/s
Number of channels 2 channels (stereo)
Analogue audio inputs and outputs
MIC/EXT IN jack (can provide plug-in power) 3.5-mm stereo mini jack
  Input impedance 25 kΩ
  Reference input level −20 dBV
  Maximum input level −4 dBV
  Phones/LINE OUT jack 3.5-mm stereo mini jack
  Output impedance 12 Ω
  Reference output level −14 dBV (at 10 kΩ load)
  Maximum output level +2 dBV (at 10 kΩ load)
Maximum output 20 mW + 20 mW (at 32 Ω load)
Built-in speaker 0.3 W (mono)
Control inputs/outputs
USB port Mini-B type
  Format USB 2.0 HIGH SPEED mass storage class
Audio performance
Frequency response (EXT IN to LINE OUT) 20 Hz – 20 kHz +1/–3 dB (44.1 kHz, JEITA)
20 Hz – 22 kHz +1/–3 dB (48 kHz, JEITA)
20 Hz – 40kHz +1/-3 dB (96 kHz, JEITA)
Distortion (EXT IN to LINE OUT) 0.05% or less (44.1k/48k/96kHz, JEITA)
S/N ratio 92dB or above (44.1k/48k/96kHz, JEITA)
Note: Measurements based on JEITA CP-2150
Requirements for connected computers
Windows Pentium 300 MHz or more
128MB or more memory
USB port (USB 2.0 is recommended)
Mac Power PC, iMac, G3, or G4 with 266 MHz or more
64 MB or more memory
USB port (USB 2.0 is recommended)
Recommended USB host controller Intel chip set
Supported operating systems Windows XP, Windows Vista, Windows 7, Windows 8 (including 8.1)
Mac OS X 10.2 or later
Wi-Fi standard IEEE 802.11b/g/n (2.4GHz only)
Wireless communication mode Simple access point (Limited AP)
Wi-Fi security WPA2-PSK (WPS2.0 compatible)
Power supply and other specifications
Power supply 2 AA batteries (alkaline or NiMH)
USB bus power from a computer
Dedicated AC adapter (TASCAM PS-P515U sold separately)
Power consumption 1.7 W (maximum)
Dimensions (W × H × D) 52 mm × 155 mm × 37 mm
Weight 170 g (with batteries)
123 g (without batteries)
Operating temperature 0–40 °C
Approximate battery operation time (continuous operation)
Alkaline batteries (EVOLTA)  
  WAV, 96kHz, 24bit About 9 hours
(Recording with built-in microphone)
  WAV, 44.1kHz, 16bit About 17.5 hours
(Recording with built-in microphone)
  MP3 format, 44.1kHz, 128kbps About 12 hours
(Recording with built-in microphone)
  MP3 format, 48kHz, 320kbps About 11 hours
(Recording with built-in microphone)
  WAV, 96kHz, 24bit About 11 hours
(Playback using headphones)
  WAV, 44.1kHz, 16bit About 13 hours
(Playback using headphones)
  MP3 format, 44.1kHz, 128kbps About 11 hours
(Playback using headphones)
  MP3 format, 48kHz, 320kbps About 11 hours
(Playback using headphones)
Using NiMH batteries (eneloop)  
  WAV, 96kHz, 24bit About 9 hours
(Recording with built-in microphone)
  WAV, 44.1kHz, 16bit About 13.5 hours
(Recording with built-in microphone)
  MP3 format, 44.1kHz, 128kbps About 12 hours
(Recording with built-in microphone)
  MP3 format, 48kHz, 320kbps About 11 hours
(Recording with built-in microphone)
  WAV, 96kHz, 24bit About 12 hours
(Playback using headphones)
  WAV, 44.1kHz, 16bit About 13.5 hours
(Playback using headphones)
  MP3 format, 44.1kHz, 128kbps About 10 hours
(Playback using headphones)
  MP3 format, 48kHz, 320kbps About 10 hours
(Playback using headphones)
Recording: JEITA recording time, Playback: JEITA music playback time

Design and specifications subject to change without notice.

Last modified: 2015-09-18 17:25:55 UTC