-------------------------------------------------------------------------------------------------------------
Latest information (2023.4.19)
-------------------------------------------------------------------------------------------------------------
The most recent versions of the firmware for this unit are as follows.

Firmware: V1.02  (Previously V1.01 Updated at this time)

We request that you always use the latest software/firmware version for this unit.
For information about the latest software/firmware, check the TEAC Global Site (http://teac-global.com/)

-------------------------------------------------------------------------------------------------------------
Information about related equipment, software and other versions
-------------------------------------------------------------------------------------------------------------
The following information about versions is current as of April 19, 2023.
Please check individual product pages for the latest information.

- TASCAM Sonicview 16/24
　　- Firmware      : V1.3.0  （date of latest update: 19 April 2023）

　　- Dante module firmware
      　<TASCAM Sonicview 16/24 units with serial numbers No.223xxxx, 226xxxx and 229xxxx（Brooklyn II）>  （date of latest update: 14 March 2023）
          Product Version             : V1.0.1   
          Software Version            : V1.0.1.5
          Firmware Version            : V1.0.1.5
          Dante Firmware Version      : V4.2.3.13

        <TASCAM Sonicview 16/24 units with serial numbers No.233xxxx and later（Brooklyn 3）>               (date of latest update: no update)
          Product Version             : V1.0.0
          Software Version            : V1.0.0.4
          Firmware Version            : V1.0.0.4
          Dante Firmware Version      : V4.2.4.8

- "TASCAM Sonicview Control" software for TASCAM Sonicview 16/24
  　Version         : V1.3.0  （date of latest update: 19 April 2023）

- "TASCAM Sonicview USB for Windows" USB driver for TASCAM Sonicview 16/24
    Version         : V1.0.1  （date of latest update: 14 March 2023）

- IF-MTR32 32-channel multitrack recording card for TASCAM Sonicview 16/24
　　Firmware        : V1.10   （date of latest update: 19 April 2023）

- SB-16D
    - Firmware      : V1.02   （date of latest update: 19 April 2023）

　　- Dante module firmware
      　<TASCAM SB-16D units with serial numbers No.223xxxx, 226xxxx, 228xxxx（Brooklyn II）>   (date of latest update: no update)
          Product Version             : V1.0.0
          Software Version            : V1.0.0.3
          Firmware Version            : V1.0.0.3
          Dante Firmware Version      : V4.2.3.13

        <TASCAM SB-16D units with serial numbers Serial No.232xxxx and later（Brooklyn 3）>     (date of latest update: no update)
          Product Version             : V1.0.0
          Software Version            : V1.0.0.2
          Firmware Version            : V1.0.0.2
          Dante Firmware Version      : V4.2.4.8

- "TASCAM IO CONTROL" software for SB-16D
    Version         : V1.0.1  （date of latest update: 19 April 2023）

<URLs>
 TASCAM Sonicview 16 related :<https://tascam.jp/int/product/sonicview_16/download>
 TASCAM Sonicview 24 related :<https://tascam.jp/int/product/sonicview_24/download>
 TASCAM IF-MTR32 related     ：<https://tascam.jp/int/product/if-mtr32/download>
 TASCAM SB-16D related       :<https://tascam.jp/int/product/sb-16d/download>
=============================================================================================================


--------------------------------------------------------------------------------------------------------------
FW V1.02  (2023.4.19)
--------------------------------------------------------------------------------------------------------------
< Maintenance items >
- If the GPIO-OUT port operation mode was set to “Extension” for multiple ports of this unit, a delay occurred in the output timing of each port.
  This has been changed so that output occurs with the same timing.
　　Note: To enable these changes, update the firmware of the Sonicview unit to version 1.3.0. These changes will not take effect with version 1.2.0 or older.
- When recalling preset data from TASCAM IO CONTROL, the mute status before recalling would be retained. This has been fixed.