Compatibility with iOS/iPadOS
This page will be removed. Please use our new compatibility page instead.
The charts on this page show which Tascam products are supported under the different versions of iOS or iPadOS. Check our download section to obtain the latest drivers/versions.
iOS 16 / iPadOS 16
Product | Current state (27 Sept 2022) |
Firmware | Note |
---|---|---|---|
Ministudio Personal US-32 | V2.30 | *1 | |
Ministudio Creator US-42 | V2.30 | *1 | |
Ministudio Creator US-42B | V2.30 | *1 | |
Mixcast 4 | |||
TM-250U | NEW | *1 | |
iXR | |||
US-1x2 | |||
US-2x2 | V1.01 | *1 | |
US-4x4 | V1.01 | *1 | |
US-1x2HR | |||
US-2x2HR | |||
US-4x4HR | |||
US-16x08 | |||
Celesonic US-20x20 | |||
SERIES 102i | |||
SERIES 208i | |||
Model 12 | |||
Model 16 | |||
Model 24 | |||
DR-05X | V1.14 | *1 | |
DR-07X | V1.14 | *1 | |
DR-40X | V1.06 | *1 | |
Portacapture X8 | |||
MX-8A | |||
DA-6400 Control | |||
DCP Connect | |||
DR Control | |||
EZ Connect | |||
MX Connect | |||
Podcast Editor | |||
Portacapture Control | |||
SS250 Control |
*1 | Tested on an iPhone SE (3rd generation) |
iOS 15 / iPadOS 15
Product | Current state (18 Jan 2022) |
Firmware | Note |
---|---|---|---|
Ministudio Personal US-32 | V2.30 | *1 | |
Ministudio Creator US-42 | V2.30 | *1 | |
Ministudio Creator US-42B | V2.30 | *1 | |
Mixcast 4 | V1.01 | *1 | |
iXR | V1.02 | *1 | |
US-1x2 | V1.00 | *1 | |
US-2x2 | V1.01 | *1 | |
US-4x4 | V1.01 | *1 | |
US-1x2HR | V1.00 | *1 | |
US-2x2HR | V1.00 | *1 | |
US-4x4HR | V1.00 | *1 | |
US-16x08 | V2.00 | *1 | |
Celesonic US-20x20 | V2.00 | *1 | |
SERIES 102i | V1.02 | *1 | |
SERIES 208i | V1.02 | *1 | |
Model 12 | V1.22 | *1 | |
Model 16 | V1.30 | *1 | |
Model 24 | V1.61 | *1 | |
DR-05X | V1.11 | *1 | |
DR-07X | V1.11 | *1 | |
DR-40X | V1.02 | *1 | |
Portacapture X8 | V1.00 | *1 | |
MX-8A | V1.10 | *1 | |
DA-6400 Control | V1.01 | ||
DCP Connect | V1.1.1 | ||
DR Control | V2.11 | ||
EZ Connect | V1.2.0 | ||
MX Connect | V1.2.0 | ||
Podcast Editor | V1.0.3 | ||
Portacapture Control | V1.0.0 | ||
SS250 Control | V2.0.2 |
*1 | Tested with iPhone 7 and iPad Pro (11-inch). |
iOS 14 / iPadOS 14
Product | Current state (21 Oct 2020) |
Firmware | Note |
---|---|---|---|
SERIES 102i | V1.02 | *1, *2, *4, *5 | |
SERIES 208i | V1.02 | *1, *2, *4, *5 | |
MiNiSTUDIO CREATOR | V2.30 | *1 | |
MiNiSTUDIO PERSONAL | V2.30 | *1 | |
iXR | V1.02 | *1, *3, *5 | |
US-1x2 | V1.00 | *1, *2 | |
US-2x2 | V1.01 | *1, *2, *5 | |
US-4x4 | V1.01 | *1, *2, *5 | |
US-16x08 | V2.00 | *1, *2, *4, *5 | |
Celesonic US-20x20 | V2.00 | *1, *2, *4, *5 | |
DR-05X | V1.11 | *1 | |
DR-07X | V1.11 | *1 | |
DR-40X | V1.02 | *1 | |
Model 12 | V1.11 | *1 | |
Model 16 | V1.30 | *1 | |
Model 24 | V1.60 | *1 | |
MX-8A | V1.10 | *1, *4, *5 | |
DA-6400 Control | |||
Tascam DCP Connect | |||
Tascam MX Connect | |||
Tascam EZ Connect | |||
SS250 Control | |||
DR Control |
*1 | Tested on iPhone 7 and iPad Pro (11-inch). |
*2 | When using an iPhone XR with a Lightning to USB Camera Adapter, after the iOS device's screen is unlocked, unplug-and-plug back the Lightning to USB Camera Adapter in order to have audio input/output working again. This measure is not required if you are using a genuine Apple Lightning to USB 3 Camera Adapter with power supply function. |
*3 | It has been confirmed that when an iOS device screen locks with iXR connected, the iOS device will immediately deactivate this. If you want your iOS device to be locked, unplug the Lightning cable and disconnect iXR. |
*4 | It has been confirmed that when using the pre-installed Music app on iPhone, selecting a file with different format such as different sampling rate while other file is already being played will cause playback to stop. With iOS 14 just tap again the play button to start playback. |
*5 | It has been confirmed that there are cases in which noise may occur during playback using Cubasis (including Cubasis LE). We will keep you informed on this page once further updates are available. |
Legend
Supported | |
In Final Testing | |
Not Supported |
iOS 13 / iPadOS 13
Product | Current state (14 Oct 2019) |
Firmware | Note |
---|---|---|---|
SERIES 102i | V1.02 | *1 *2 *4 *5 | |
SERIES 208i | V1.02 | *1 *2 *4 *5 | |
MiNiSTUDIO CREATOR | V2.30 | *1 *2 *5 | |
MiNiSTUDIO PERSONAL | V2.30 | *1 *2 *5 | |
iXR | V1.02 | *1 *3 *5 | |
US-1x2 | V1.00 | *1 *2 *4 *5 | |
US-2x2 | V1.01 | *1 *2 *5 | |
US-4x4 | V1.01 | *1 *2 *5 | |
US-16x08 | V2.00 | *1 *2 *4 *5 | |
Celesonic US-20x20 | V2.00 | *1 *2 *4 *5 | |
DR-05X | V1.00 | *1 *2 *5 | |
DR-07X | V1.00 | *1 *2 *5 | |
DR-40X | V1.01 | *1 *2 *5 | |
DA-6400 Control | V1.0.1 | *6 | |
Tascam DCP Connect | V1.1.1 | *6 *7 | |
Tascam MX Connect | V1.2.0 | *6 *7 | |
Tascam EZ Connect | V1.1.1 | *6 *7 | |
SS250 Control | V2.0.1 | *6 *7 | |
DR Control | V2.11 | *6 |
*1 | Tested on iPhone XR, iPhone 8, iPhone 7, iPhone X and iPad (6th Generation). |
*2 | When using an iPhone XR with a Lightning to USB Camera Adapter, after the iOS device's screen is unlocked, unplug-and-plug back the Lightning to USB Camera Adapter in order to have audio input/output working again. This measure is not required if you are using a genuine Apple Lightning to USB 3 Camera Adapter with power supply function. |
*3 | It has been confirmed that when an iOS device screen locks with iXR connected, the iOS device will immediately deactivate this. If you want your iOS device to be locked, unplug the Lightning cable and disconnect iXR. |
*4 | It has been confirmed that when using the pre-installed Music app on iPhone, selecting a file with different format such as different sampling rate while other file is already being played will cause playback to stop. In this case, if you are using iOS 13, unplug-and-plug back the cable. With iOS 13.1 just tap again the play button to start playback. |
*5 | It has been confirmed that there are cases in which noise may occur during playback using Cubasis (including Cubasis LE). We will keep you informed on this page once further updates are available. |
*6 | Tested on iPhone 8, iPhone 7, iPhone X and iPad (6th Generation). |
*7 | Multi-byte characters are not displayed correctly. Entering multi-byte characters will cause the application to freeze and become inoperable. You can use the app under iOS 13 if you only enter simple alphanumeric characters for descriptions. |
iOS 12
Product | Current state (27 Sep 2019) |
Firmware | Note |
---|---|---|---|
iXR | V1.02 | *1 *2 *3 *4 *5 | |
iXZ | – | *1 *2 *3 *4 | |
MiNiSTUDIO CREATOR | V2.30 | *1 *2 | |
MiNiSTUDIO PERSONAL | V2.30 | *1 *2 | |
US-1x2 | V1.00 | *6 | |
US-2x2 | V1.01 | *1 *2 | |
US-4x4 | V1.01 | *1 *2 | |
US-16x08 | V2.00 | ||
US-20x20 | V2.00 | ||
SERIES 102i | V1.02 | *2 | |
SERIES 208i | V1.02 | *2 | |
DR-05X | V1.00 | *1 *2 | |
DR-07X | V1.00 | *1 *2 | |
DR-40X | V1.00 | *1 *2 |
*1 | Evaluated with iPhone XR |
*2 | Evaluated with iPhone XS Max |
*3 | Evaluated with iPhone XS |
*4 | Evaluated with iPhone 8 |
*5 | Evaluated with iPhone 7 |
*6 | Cubasis LE restrictions cannot be unlocked
when
connecting US-1x2 with USB Type-C iPad tablets. These connecting issues are fixed with the current iPadOS. |
In case of using a Lightning - USB camera adapter with no power supply function (except for iXR)
After the iOS device's screen is unlocked, unplug-and-plug back the Lightning - USB camera adapter in order to have audio input/output working again. This measure is not required if you are using a genuine Apple Lightning to USB 3 Camera Adapter with power supply function.
With SERIES 102i and SERIES 208i, the USB indicator on the unit will remain lit even when the device's screen is locked; this won't affect the operation in progress on the unit.
Legend
Supported | |
In Final Testing | |
Not Supported |
iOS 11
USB Audio Interfaces
Product | Result |
Firmware
|
Note
|
---|---|---|---|
V1.02
|
*1, *9
|
||
-
|
*3
|
||
V2.30
|
*1
|
||
V2.30
|
*1
|
||
V1.00
|
*1
|
||
V1.01
|
*1, *8
|
||
V1.01
|
*1, *8
|
||
V2.00
|
*1
|
||
V2.00
|
*1
|
CD Players
Software
Product
|
Result |
Version
|
Note
|
---|---|---|---|
V2.0.0
|
*5
|
||
Validating
|
|||
V2.10
|
*2, *6
|
*1 | Verification with iPhone 8, iPhone 7, iPhone 6s, iPhone 6 Plus, iPhone 5s, iPad Air 2, iPad Pro (12.9-inch) 2nd generation, iPad Pro (10.5-inch), iPad Pro (9.7-inch), iPod touch 6G |
---|---|
*2 | Verification with iPhone 8, iPhone 7, iPhone 6s, iPhone 6 Plus, iPhone 5s, iPad Air 2, iPad Pro (12.9-inch) 2nd generation, iPad Pro (10.5-inch)), iPod touch 6G |
*3 | Verification with iPhone 8, iPad Pro (12.9-inch) 2nd generation |
*4 | Verification with iPhone 8 |
*5 | Verification with iPhone X, iPhone 8, iPhone 7, iPhone 6 Plus, iPhone 5s, iPad Air 2 |
*6 | Use with DR-22WL or DR-44WL |
*7 | Use with TEAC HR Remote |
*8 | When the US-2x2 or US-4x4 is connected to an iOS device, the USB indicator may unexpectedly start to flash even though the audio streaming is functioning. By turning US-2x2 or US-4x4 power off, and then on again, the indicator will return to solid again. To avoid this, we recommend connecting the lightning cable between the iOS device and US-2x2 or US-4x4 before turning on the power. It is always recommended to save any work and mute the speakers or headphones before turning any interface off and on. |
*9 | If an iOS device goes into sleep mode after auto-lock, the iOS device connected to an iXR might wake after the USB indicator flashes multiple times. To save power consumption, we recommend removing the cable between the iOS device and the iXR. |
Legend
Supported | |
In Final Testing |
Page last modified: 2022-10-31 16:04:50 UTC