IF-AN16/OUT
16-channel Analogue Output Card
The IF-AN16/OUT is an optional interface card with 16 balanced analogue outputs for various products that have a Tascam expansion slot. Outputs are provided via two Sub-D 25-pin connectors.
Features at a glance
- 16 balanced analogue outputs
- Two D-sub 25-pin connectors for channels 1-8 and 9-16
- Selectable output attenuation for each channel: 0 dB to –14 dB (in 0.5-dB steps)
- Compatible with the Tascam expansion slot system
Specifications
| Analogue outputs | |
|---|---|
| ANALOG 1–8/9–16 OUT | D-Sub, 25-pin |
| Locking screws | No. 4-40 UNC (inch type) |
| Nominal output levels | +4 dBu, +6 dBu (only when maximum output level is +15 dBu) |
| Maximum output levels | +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (switched according to nominal level of device installed in) |
| Output impedance | ≤200 Ω |
| Output attenuation | 0–14 dB (in 0.5-dB steps) |
| Audio performance | |
|---|---|
| Frequency response | 20 Hz – 20 kHz, +0.1 dB / –0.5 dB (–16 dBFS input, 44.1/48 kHz sampling frequency, JEITA) 20 Hz – 40 kHz, +0.1 dB / –1.0 dB (–16 dBFS input, 88.2/96 kHz sampling frequency, JEITA) |
| Distortion (THD+N) | ≤0.001% (0 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| S/N ratio | ≥110 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| Dynamic range | ≥110 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| Crosstalk | ≥110 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| Load impedance：2 kΩ or higher, 0 dBu = 0.775 Vrms |
| Other specifications | |
|---|---|
| Dimensions (w × h × d, overall) | 107 mm × 40 mm × 162 mm |
| Weight | 240 g |
Design and specifications subject to change without notice.
Page last modified: 2026-03-10 16:57:00 UTC